P-Mount T4P cartridges

LP TUNES REFERENCE SERIES VSLC CARTRIDGE

The VSLC special line contact stylus cartridge is the flagship model in LP Tune's Reference Series V cartridge line – a line that harks back to the glorious days of cartridge manufacturing and record playing. The VSLC is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s ultra-lightweight special line contact stylus allows it to trace the record groove with incredible accuracy and minimum abrasion, resulting in nuanced audio reproduction, low distortion and low record wear. The cartridge Includes mounting hardware.

● LP TUNE's flagship Reference T4P P-mount cartridge
● Nude Special Line Contact (0.075 × 0.006 mil radii)
● Frequency response: 20 ~ 30,000 Hz
● Tracking force: 1.25 - 1.5g
● Output voltage @ 1kHz, 5 cm/sec: 3mV
● Dual magnets for superb channel separation and extended frequency response
● Nuanced audio reproduction, low distortion and low record wear.

DISCONTINUED - OUT OF STOCK

For alternatives, please refer to:

• LP TUNES T4P SERIES III PHONO CARTRIDGE
• AUDIO-TECHNICA AT-301EP AT 301EP AT301EP PHONO CARTRIDGE
• LP TUNES CARBON FIDELITY CFT4PSE CARTRIDGE

-----------------------------------------------------------------------------------------------------------

AUDIO-TECHNICA STUDIO REFERENCE SERIES 3003 PHONO CARTRIDGE

The 3003 phono cartridge is a model within the highly acclaimed Studio Reference Series representing one of Audio-Technica's finest P-mount T4P and Standard half-inch mountable phono cartridges. The Studio Reference Series are best known for their excellent musicality, outstanding value, high technology and reasonable price.

The Audio-Technica Studio Reference Series 3003 phono cartridge uses a highly polished special elliptical stylus to very accurately extract record groove information with a minimum of wear. Audio-Technica uses a thin-wall alloy tube cantilever (the hollow rod that extends from the cartridge to the diamond tip), for low mass, low resonance and high sensitivity. The Audio-Technica 3003 phono cartridge reproduces a wide, extended frequency response with low distortion. It offers excellent tracking at 1 - 1.5 grams, saving your LPs from undue wear. It fits P-mount or standard half-inch tonearms with the supplied adaptor.

The Studio Reference 3003 cartridge comes complete with installation instructions and mounting hardware for P-mount and half-inch standard tonearms. Originally packaged in a Red carton enclosed plastic case, this latest version was modernized with clamshell sealed packaging for long shelf life and excellent product protection. For excellent musicality, long playing life, and for minimum record wear, choose the Audio-Technica Studio Reference 3003 phono cartridge.
Note: The photo of the specification sheet is provided for reference only and is not included in the latest packaging.

Audio-Technica 3003 Phono Cartridge Specifications
- Output voltage @ 1kHz, 5cm/sec: 5mV
- Channel balance: 1.25dB
- Channel separation @ 1kHz/10kHz: 29/18dB
- Frequency response: 15Hz-27kHz
- Vertical tracking force: 1 - 1.5 g
- Stylus type: .03 x .07 mil bi-radial
- Cantilever construction: Thin-wall tube
- Recommended load resistance: 47k ohms
- Mounting: P-mount with detachable and separate 1/2 inch mount adapter
- Accessories included: Screws and nuts, screwdriver, half-inch mount adapter

AUDIO-TECHNICA AT-311EP AT 311EP AT311EP PHONO CARTRIDGE

The Audio-Technica AT311EP phono cartridge offers P-mount T4P convenience, superb performance and high accuracy. It is one of the top P-mount cartridges available from Audio-Technica and a favorite by those who value sound quality and who know how to listen well. Furthermore, since the Audio-Technica AT311EP phono cartridge uses a very high quality elliptical stylus that is housed in an industry standard holder, you have assured availability of stylus replacements for many, many years.

Audio-Technica AT311EP Phono Cartridge Specifications
- Output voltage @ 1kHz,5cm/sec: 5mV
- Channel balance: 1.25dB
- Channel separation @ 1kHz/10kHz: 26/18dB
- Frequency response: 15Hz-27kHz
- Tracking force: 1 - 1.5 g
- Stylus type: .03 x .07 mil elliptical
- Cantilever construction: Thin-wall tube
- Recommended load resistance: 47k ohms
- Color: Black/White
- Mounting: P-mount with a separate adapter for 1/2 inch mount

GRADO BLACK 3 P-MOUNT T4P PHONO CARTRIDGE

Ships to US only

Grado P-mount T4P cartridges are acclaimed worldwide by experts as virtually the finest pickups at their price points. The Grado Prestige series of P-mount T4P phono cartridges are designed for high output and excellent stability under the most demanding conditions. All of the range uses Grado's patented Optimized Transmission Line (OTL) technology which makes your records sound quieter, improve the height width and depth of the sound stage and offer more detail than previously achievable. Grado's OTL technology is all about delivering more music, more performance.

Grado Black P-mount T4P Phono Cartridge Specifications
- Type: Moving magnet
- Output voltage: 5mV
- Frequency response: 10Hz-50kHz
- Load impedance: 47k ohms
- Channel separation: 30dB
- Stylus type: Elliptical
- Stylus replacement: User replaceable
- Compliance: 20mm/N
- Tracking force: 1.0 - 2.0 g
- Recommended tracking force: 1.5 g
- Weight: 5.5 g

For stylus replacements, refer to Related Products:
- Standard stylus: Grado Black Stylus
- Upgrade stylus: Grado Green Stylus

AUDIO-TECHNICA AT-301EP AT 301EP AT301EP PHONO CARTRIDGE

The Audio-Technica AT301EP phono cartridge offers P-mount T4P convenience, high performance and musical accuracy. It is a top quality P-mount cartridge and very popular with those seeking an affordable upgrade from the mundane. Furthermore, since the Audio-Technica AT301EP phono cartridge uses an elliptical stylus that is an industry standard, you have assured availability of stylus replacements for many decades.

Audio-Technica AT301EP Phono Cartridge Specifications
- Output voltage @ 1kHz, 5cm/sec: 5mV
- Channel balance: 1.25dB
- Channel separation @ 1kHz/10kHz: 26/17dB
- Frequency response: 15Hz-25kHz
- Stylus type: 0.4 x 0.7 mil elliptical
- Stylus construction: Bonded
- Cantilever construction: Alloy tube
- Tracking force range: 1 - 1.5 g
- Recommended load resistance: 47k ohms
- Color: Black/White
- Mounting: P-mount with a separate adapter for 1/2 inch mount

GRADO BLUE 1 BLUE1 P-MOUNT T4P PHONO CARTRIDGE

Ships to US only

Grado P-mount T4P phono cartridges are acclaimed worldwide by experts as virtually the finest pickups at their price points. The Grado Prestige series of P-mount T4P cartridges are designed for high output and excellent stability under the most demanding conditions. All of the range uses Grado's patented Optimized Transmission Line (OTL) technology which makes your records sound quieter, improve the height, width and depth of the sound stage and offer more detail than previously achievable. Grado's OTL technology is all about delivering more music, more performance.

Grado Blue 3 P-mount T4P Phono Cartridge Specifications
- Type: Moving magnet
- Output voltage: 5mV
- Frequency response: 10Hz-55kHz
- Load impedance: 47k ohms
- Stylus type: Elliptical
- Stylus replacement: User replaceable
- Compliance: 20mm/N
- Tracking force: 1.0 - 2.0 g
- Recommended tracking force: 1.5 g
- Weight: 5.5 g

For stylus replacements, refer to Related Products:
- Standard stylus: Grado Blue Stylus
- Upgrade stylus: Grado Red Stylus

SHURE V15 V-P PHONO CARTRIDGE
- Discontinued, contact us for replacement.

The Shure V15 V-P is an exceptional phono cartridge. It incorporates many of the sophisticated array of construction features and performance capabilities of the Shure V15 V in a P-mount T4P cartridge. The result is refined sound reproduction added to the convenience of the P-mount T4P design. The Shure V15 V-P provides impeccably accurate tracking and unequaled flatness of response thus resulting in performance that recaptures all the nuances and emotion of the original performance. For those seeking a P-mount T4P phono cartridge that is beyond the extraordinary, then the Shure V15 V-P is it!

Features
- Beryllium MICROWALL/Be™ stylus shank provides unrivaled trackability for accurate sound reproduction
- MASAR™ -polished hyperelliptical stylus tip reduces record wear and distortion
- Exclusive SIDE-GUARD stylus protection system guards against accidental stylus damage
- P-mount construction for instant mounting with no further adjustments usually necessary
- The highest ever track ability at 1.25 grams for extended record and tip life
- Undeviating flat response, tightest tolerances ever achieved

Shure V15 Type V-P Phono Cartridge Specifications
- Output voltage @ 1kHz, 5cm/sec: 3.2mV
- Channel balance: 1.5dB
- Channel separation @ 1kHz/10kHz: 25/18dB
- Frequency response: 20Hz-20kHz
- Stylus type: .0002 x .0015 inch nude hyperelliptical
- Tracking force: 1.25 g
- Recommended load resistance: 47k ohms
- Color: Black/Light Gray
- Weight: 5.9 g
- Stylus replacement: Shure VN5P

GRADO SILVER 1 SILVER1 P-MOUNT T4P PHONO CARTRIDGE

Ships to US only

Grado P-mount T4P cartridges are acclaimed worldwide by experts as virtually the finest pickups at their price points. The Grado Prestige series of P-mount T4P cartridges are designed for high output and excellent stability under the most demanding conditions. All of the the range uses Grado's patented Optimized Transmission Line (OTL) technology which makes your records sound quieter, improve the height, width and depth of the sound stage and offer more detail than previously achievable. Grado's OTL technology is all about delivering more music, more performance.

Grado Silver 1 P-mount T4P Phono Cartridge Specifications
- Type: Moving magnet
- Output voltage: 5mV
- Frequency response: 10Hz-60kHz
- Load impedance: 47k ohms
- Channel separation: 35dB
- Stylus type: Elliptical
- Stylus replacement: User replaceable
- Compliance: 20mm/N
- Tracking force: 1.0-2.0 g
- Recommended tracking force: 1.5 g
- Weight: 5.5 g

For stylus replacements, refer to Related Products:
- Standard stylus: Grado Silver Stylus
- Upgrade stylus: Grado Gold Stylus

LP Tunes CARBON FIDELITY CFT4PSE CARTRIDGE 
- Music that makes you want to listen.™

Listen to the new voice of music. Carbon fiber composites offer 10 times the strength of steel at half the weight. Co-developed and designed with LP Tunes by Audio-Technica's best engineers, new Carbon Fidelity T4PSE Spectra Elliptical (CFT4PSE) cartridge benefits from the latest quality parts and materials technology featuring a super carbon fiber cantilever that respond to the most complex high amplitude attacks and transients as well as the most heavily recorded passages. The updated design, tight specifications, Twin-Flux™ magnets, high-quality moving system fulcrum and radial damping ring allied with a Spectra elliptical diamond tip produce music that makes you want to listen.

Mastered to illuminate in comparison to lofty cartridges beyond the economics of most listeners, the CFT4PSE touches and endears the more you listen. You won't want to go back to your underperforming or pricey cartridge. You'll hear, feel and sense the music exquisitely rendered — harmonically full-bodied, refractive and refreshingly crystal clean with luminous detail spatially radiating with realness. You'll experience remarkable note clarity, projection and nuanced tonal complexity previously unheard and unappreciated.¹

CARBON FIDELITY CFT4PSE Phono Cartridge Details 
- Type: Moving Magnet VM Dual Magnet Stereo
- Output voltage @ 1kHz,5cm/sec.: 2.5 mV
- Channel balance at 1kHz: 2.0 dB or less
- Channel separation @ 1kHz: over 18 dB
- Frequency response: 20Hz-20kHz
- Load resistance: 47k ohms
- Load capacitance: 100 - 200 pF
- Stylus type: 0.3 × 0.7 mil Spectra Elliptical diamond
- Cantilever: Super Fidelity Carbon Fiber²
- Tracking force range: 1.25 ± 0.25 g (12.26 mN)
- DC resistance: 410 ohms
- Coil impedance at 1kHz: 2.8k ohms
- Phase polarity: In-phase, positive polarity 
- Recommended load resistance: 47k ohms
- Recommended break-in duration: 30 hours
- Color: Black, Indigo, White LP Tunes logo
- Weight: 5.9g ± 0.5g
- Dimensions (mm): 29.8L × 10.0W × 15.3H
- Accessories included: Screw × 1, and nut × 1
- Stylus replacement: LP Tunes CFNT4PSE stylus

____________________________________ 
Footnote 1: A high resolution system allows full experience of the nuanced tonal complexity offered by the Carbon Fidelity CFT4PSE. 
Footnote 2: Carbon fiber composites offer 10 times the strength of steel at half the weight. Each producer's carbon fiber differs from those of its competitors, and the processing details are considered to be intellectual property. The special carbon fiber used in the Carbon Fidelity cartridges and styli is patiently and expertly considered for its signature characteristics to bring out the subtleties and finesse of music extracted from the grooves of records and LPs. For carbon fiber info see: "The making of carbon fiber".

SHURE M92E PHONO CARTRIDGE

The Shure M92E phono cartridge is a cost-effective way to improve the sound of a turntable system, especially one that has been musically limited by a conical cartridge. A quality Shure magnetic cartridge featuring a bi-radial 0.4 mil x 0.7 mil radii diamond tip, the Shure M92E offers performance that is faithful to the music.

Shure M92E Phono Cartridge Specifications
- Tonearm mount: P-mount with 1/2 inch adapter
- Type: Moving magnet
- Output voltage @ 1kHz, 5cm/sec: 5mV
- Frequency response: 20Hz-18kHz
- Recommended load resistance: 47k ohms
- Channel separation @ 1kHz: 20dB
- Stylus type: 0.4 mil x 0.7 mil elliptical
- Cantilever: Aluminum alloy tube
- Tracking force: 0.75 - 1.5 g
- Recommended tracking force: 1.5 g
- Weight: 5.9 g (7.4 g with adapter)
- Accessories included: User guide, mounting hardware
- Stylus replacement: User replaceable Shure N92E
- Warranty: 1 year

LP Tunes T4P SERIES III PHONO CARTRIDGE

LP Tunes introduces the T4P Series III phono cartridge to enrich the availability of very high quality P-mount phono cartridges.

By preference and conviction the LP Tunes T4P Series of cartridges offer world-class craftsmanship, excellent performance, exemplary value, natural and clean tone and musicality in a simple extraordinary package. They are fitted for P-mount or T4P tonearms. Each is crafted with tolerances held to mere thousandths of an inch. Stringent quality control assures that tolerances and performance criteria are maintained for each product. As in other series within the LP Tunes magnetic phono cartridge range, your investment in a cartridge does not become obsolete. When your appreciation of music and critical listening develop and your demands for sophisticated electronics grow, you can easily and sensibly upgrade performance by installing a better stylus within the series.

The T4P Series III with its highly polished bi-radial stylus offers vivid harmonic and natural detail, accomplished performance, clarity and elegance. You'll hear captivating music and rediscover the simple pleasure of quiet listening.

LP Tunes T4P Series III Phono Cartridge Specifications
- Frequency response: 15Hz-25kHz
- Output voltage @ 1kHz, 5cm/sec: 5mV
- Channel separation @ 1kHz/10kHz: 26/17dB
- Channel balance: 1.5dB
- Vertical tracking force: 1.0-1.5 g
- Stylus shape: Bi-radial, 0.4 x 0.7 mil
- Cantilever: Thin-wall tube
- Recommended load impedance: 47k ohms
- Recommended load capacitance: 100-200 pf
- Weight: 6 g
- Dimensions (mm): 34l x 10w x 17h
- Stylus replacement: LP Tunes ATNSERIESIII

LP Tunes T4P SERIES I PHONO CARTRIDGE

LP Tunes introduces the T4P Series I phono cartridge to enrich the availability of very high quality P-mount phono cartridges.

By preference and conviction the LP Tunes T4P Series of cartridges offer world-class craftsmanship, excellent performance, exemplary value, natural and clean tone and musicality in a simple extraordinary package. They are fitted for P-mount or T4P tonearms. Each is crafted with tolerances held to mere thousandths of an inch. Stringent quality control assures that tolerances and performance criteria are maintained for each product. As in other series within the LP Tunes magnetic phono cartridge range, your investment in an entry level cartridge does not become obsolete. When your appreciation of music and critical listening develop and your demands for sophisticated electronics grow, you can easily and sensibly upgrade performance by installing a better stylus within the series.

The T4P Series I with its highly polished uni-radial stylus offers good extractive performance, articulate expression and natural detail. It's a fine and sensible way to start enjoying your LPs and records.

LP Tunes T4P Series I Phono Cartridge Specifications
- Frequency response: 20Hz-20kHz
- Output voltage @ 1kHz, 5cm/sec: 5mV
- Channel separation @ 1kHz/10kHz: 20/15dB
- Channel balance: 1.5dB
- Vertical tracking force: 1.0-1.5 g
- Stylus shape: Uni-radial, 0.7 mil
- Cantilever: Thin-wall tube
- Recommended load impedance: 47k ohms
- Recommended load capacitance: 100-200 pf
- Weight: 6 g
- Dimensions (mm): 34l x 10w x 17h
- Stylus replacement: LP Tunes ATNSERIESI

AUDIO-TECHNICA 1001 PHONO CARTRIDGE (STUDIO REFERENCE SERIES)

The Audio-Technica 1001 phono cartridge is a model within the Studio Reference Series representing one of Audio-Technica's finest P-mount T4P and Standard Half-inch mountable phono cartridges. The Studio Reference Series are best known for their excellent musicality, outstanding value, high technology and reasonable price.

The Audio-Technica 1001 phono cartridge uses a highly polished conical stylus to extract record groove information with precision and with a minimum of wear. Audio-Technica uses a thin wall metal alloy tube cantilever (the hollow rod that extends from the cartridge to the diamond tip), for low mass and low resonance. The Audio-Technica 1001 phono cartridge reproduces a wide frequency response with low distortion. It offers excellent tracking at 1 - 1.5 grams, saving your LPs from undue wear. It fits P-mount or standard half-inch tonearms with the supplied adapter.

The Audio-Technica 1001 phono cartridge comes complete with installation instructions and mounting hardware for P-mount and half-inch standard tonearms.

For musicality, long playing life, and for minimum record wear, choose the Audio-Technica 1001 Studio Reference phono cartridge.

Audio-Technica 1001 Phono Cartridge Specifications
- Output voltage @ 1kHz, 5cm/sec: 5mV
- Channel balance: 1.25dB
- Channel separation @ 1kHz/10kHz: 26/16dB
- Frequency response: 20 - 22,000 Hz
- Stylus type: 0.6 mil conical
- Cantilever construction: Thin-wall metal alloy tube
- Recommended load resistance: 47k ohms
- Mounting: P-mount with a separate adapter for 1/2 inch mount
- Accessories included: Screws and nuts, screwdriver

LP Tunes T4P Series V PHONO CARTRIDGE

LP Tunes introduces the T4P Series V phono cartridge to enrich the availability of very high quality P-mount phono cartridges.

By preference and conviction the LP Tunes T4P Series of cartridges offer world-class craftsmanship, excellent performance, exemplary value, natural and clean tone and musicality in a single extraordinary package. They are fitted for P-mount or T4P tonearms. Each is crafted with tolerances held to mere thousandths of an inch. Stringent quality control assures that tolerances and performance criteria are maintained for each product. As in other series within the LP Tunes magnetic phono cartridge range, your investment in an entry level cartridge does not become obsolete. When your appreciation of music and critical listening develop and your demands for sophisticated electronics grow, you can easily and sensibly upgrade performance by simply installing a better stylus within the series.

The T4P Series V uses a highly polished bi-radial diamond for extracting groove information with accurate conviction and ease. It offers colorful, dynamic, natural and vivid detail for the listener to enjoy.

LP Tunes T4P Series V Phono Cartridge Specifications
- Frequency response: 15Hz-27kHz
- Output voltage @ 1kHz, 5cm/sec: 5mV
- Channel separation @ 1kHz/10kHz: 29/18dB
- Channel balance: 1.25dB
- Vertical tracking force: 1.0-1.5 g
- Stylus shape: Bi-radial, 0.3 x 0.7 mil
- Cantilever: Thin-wall tube
- Recommended load impedance: 47k ohms
- Recommended load capacitance: 100-200 pf
- Weight: 6 g
- Dimensions (mm): 34l x 10w x 17h
- Stylus replacement: LP Tunes ATNSERIESV

LP Tunes T4P REFERENCE SERIES VL PHONO CARTRIDGE

LP Tunes introduces the T4P Reference Series VL phono cartridge for those seeking reference quality discernment and core competency in a P-mount phono cartridge.

By preference and conviction the LP Tunes T4P Series of cartridges offer world-class craftsmanship, excellent performance, exemplary value, natural and clean tone and musicality in a simple extraordinary package. They are fitted for P-mount or T4P tonearms. Each is crafted with tolerances held to mere thousandths of an inch. Stringent quality control assures that tolerances and performance criteria are maintained for each product. As in other series within the LP Tunes magnetic phono cartridge range, your investment in a cartridge does not become obsolete. When your appreciation of music and critical listening develop and your demands for sophisticated electronics grow, you can easily and sensibly upgrade performance by installing a better stylus within the series.

The LP Tunes T4P Reference Series VL offers elevated and very high accuracy and musicality. It uses a Vivid-Line diamond, exquisitely polished with precision, and then carefully mounted on a thin metal alloy tubular cantilever for long playing life and exceptional tracing of record grooves. A Vivid-Line diamond is exceptional in its tracing capability and is thus used in high fidelity listening and recording where the mission is to listen to and enjoy digitized music as you would the original recording.

The result exceptional fidelity and faithfulness to the original recording. We believe it is a world-class performer and one of the finest P-mount cartridge crafted today.

LP Tunes T4P Reference Series VL Phono Cartridge Specifications
- Frequency response: 12Hz-28kHz
- Output voltage @ 1kHz, 5 cm/sec: 3mV
- Channel separation @ 1kHz/10kHz: 29/18dB
- Vertical tracking force: 1.0-1.5 g
- Stylus shape: Vivid-Line diamond
- Stylus radius: .0029 x .0002 inch
- Cantilever: Thin-wall alloy tube
- Recommended load impedance: 47k ohms
- Recommended load capacitance: 100-200 pf
- Weight: 6 g
- Dimensions (mm): 34l x 10w x 17h
- Stylus replacement: LP Tunes ATNSERIESVL