JVC turntable belt replacement A belt-drive turntable is a musical treasure. To ensure that you always have a working belt for your turntable, we recommend that you order two and keep the other as backup. You'll be happy you did many years from now!
Turntable belt not listed? Use our FREE Belt Matching Service
For your convenience, LP Tunes offers a free belt matching service. If your turntable is not listed, all you need to do is send us via e-mail your existing belt's type (flat, round or square), measurements specifically its length and width, and present working condition (e.g., stretched but still working or no longer working).
To measure your existing belt's dimensions, follow the procedures below.
If you have the turntable belt:
• State the type of belt used (Flat, Square, Round).
• Pinch both ends of the belt.
• Measure its length.
• Multiply the pinched length by two (2x).
• If the turntable uses a Flat belt, measure its width.
• If the turntable uses a Round or Square belt, measure its thickness.
• Please include the make and model of the turntable with the belt's measurements.
If you do NOT have the turntable belt or it is shredded:
• State the type of belt that the turntable uses (Flat, Round or Square).
• Use a piece of string to tightly follow the belt's path.
• Measure the length of the string.
• Measure the width between the rims of the motor pulley that the belt can pass through without obstruction.
• Please include the make and model of the turntable with the belt's measurements.
You may of course send your belt to us for reference. Please do this only if your belt is not shredded. We'll do our best to find the correct replacement belt.
