|
AUDIO-TECHNICA AT300P AT-300P PHONO CARTRIDGE
World-class quality construction, alloy tube cantilever and a highly polished conical diamond tip
are hallmarks of the Audio-Technica AT300P cartridge (retail $69.00). Now you can upgrade the performance of your
turntable and hear music and voice with improved clarity and detail by simply replacing the original
cartridge installed in your turntable.
Comparison of audio-technica AT300P, AT301EP, and AT311EP Phono Cartridges
Model |
audio-technica
AT300P |
audio-technica
AT301EP |
audio-technica
AT311EP |
Output voltage at 1000 Hz, 5cm/sec. |
5.0 mV |
5.0 mV |
5.0 mV |
Channel balance |
1.5 dB |
1.25 dB |
1.25 dB |
Channel separation at 1 kHz/10kHz |
26/16 dB |
26/17 dB |
29/18 dB |
Frequency response |
20-22,000 Hz |
15-25,000 Hz |
15-27,000 Hz |
Stylus type |
0.6 mil conical |
0.4 x 0.7 mil elliptical |
0.3 x 0.7 mil elliptical |
Stylus construction |
Bonded round shank |
Bonded round shank |
Bonded round shank |
Cantilever construction |
Alloy tube |
Alloy tube |
Alloy tube |
Tracking force range |
1.00-1.50 g |
1.00-1.50 g |
1.00-1.50 g |
Recommended load resistance |
47 kOhm |
47 kOhm |
47 kOhm |
Cartridge colour, body/stylus |
Black/White |
Black/White |
Black/White |
| Cartridge mount |
P-mount with a separate adaptor for half-inch mount |
P-mount with a separate adaptor for half-inch mount |
P-mount with a separate adaptor for half-inch mount |
You can easily upgrade the performance and sound quality of these cartridges by upgrading to a higher performance stylus within the series.
Tracking force in a P-mount arm: After installing the cartridge, it is not usually necessary to adjust the tracking force in a pre-set arm.
|
